DRAG  CONVERSION FOR THE REVOLUTION Z

1. Remove the spool from the reel frame

2. Locate the small hex screw on the side of the drag chamber

3. With a hex key loosen the screw (you do not need to remove all the way)

4. With you finger unscrew the top of the drag chamber grabbing where the knurled cap is located

5. Remove cap

6. Locate the one way clutch found on the drag cap spindle

7. Flip the one way clutch and reassemble

DRAG  CONVERSION FOR THE T1

1. Remove the spool from the reel frame

2. Carefully remove the aluminum flat head screw cap from the top of the drag cover

3. With a screwdriver loosen the small screw from the top of the drag cover

4. Carefully remove drag cover and flip over to expose one way bearing (be carful not to lose small parts)

5. Remove one way clutch (looks like a bearing with rolling pins on the inside)

6. Flip one-way clutch

7. Reassemble reel

DRAG CONVERSION ENIGMA 2.0

1. Remove the spool from the frame

2. Remove the small clip from inside the spool

3. Carefully remove and flip the one way clutch (looks like a bearing with rolling pins on the inside) 

4. Reassemble reel

DRAG CONVERSION ARRAY V2

1. Remove the spool from the frame

2. With your fingers unscrew the small cap from the top of the drag cover

3. Turn the reel so that the main drag knob (with the TFF logo) is facing up and tap reel on your palm or on a soft flat object to loosen the one way clutch

4. Once the clutch is removed flip it over and reinsert it into the chamber on the reel